MicroCosmos Imaging Systems Pvt Ltd
India, UAE
MicroCosmos Imaging Systems · Cosmo Micro-BioCount2210

Automated Colony Counting, Built for Microbiology QC

Count bacterial and fungal colonies in about 2 seconds per plate with 0.1 mm detection, high-resolution imaging, and 21 CFR Part 11-ready software.

12.4MP DeXel-CAM (Germany) ~2 sec / plate 0.1 mm colony detection 21 CFR Part 11-ready
Download Brochure (PDF)
Cosmo Micro-BioCount2210 automated colony counter by MicroCosmos Imaging Systems
Cosmo Micro-BioCount2210 shown
~2 secCounting time per petri dish plate
0.1 mmMinimum colony detection diameter
55–90 mmStandard petri dish plate size range
12.4 MPDeXel-CAM digital colour camera, USB 3.0
Talk to a Micro-BioCount2210 specialist

Find the Right Configuration for Your Microbiology Lab

Share your plate types, throughput, and 21 CFR Part 11 validation requirements. Our specialists will recommend a configuration, provide pricing, and arrange a demo.

Takes less than a minute · No obligation

Cosmo Micro-BioCount2210 software identifying and counting colonies on a petri dish
See it in action

From plate to report in about 2 seconds

01

Place the plate

Load a standard 55–90 mm petri dish onto the imaging stage.

02

Capture

Controlled dome LED illumination produces a clean, glare-free image with the 12.4 MP DeXel-CAM.

03

Detect & separate

Recognition software identifies colonies down to 0.1 mm, separating those that are touching or overlapping.

04

Count & report

Results are generated automatically as a non-editable, traceable record — CSV, Excel or PDF.

Why Micro-BioCount2210

Built to answer the question every buyer asks first

Plenty of counters can count a plate. Here's what specifically separates the Micro-BioCount2210 for regulated Indian labs.

Faster routine counting

Approximately 2 seconds per plate, freeing analyst time for higher-value work.

Better visibility

12.4 MP German-made camera with controlled dome illumination captures a clean image every time.

Handles difficult plates

A dedicated algorithm separates and accurately counts colonies that are touching or overlapping.

Built for regulated labs

Audit trails, user roles, backup/restore and IQ/OQ/PQ documentation, standard from day one.

Flexible counting

Fully automated for routine throughput, or manual mode for edge cases and analyst verification.

Local implementation & support

Installation, training and qualification support out of MicroCosmos's Pune HQ, with a UAE presence.

Cosmo Micro-BioCount2210 is an automated colony counter for microbiology labs that identifies, counts and measures bacterial and fungal colonies on 55–90 mm petri dishes in about 2 seconds per plate. It uses a 12.4 MP German-made camera, dome LED illumination, 0.1 mm detection sensitivity, and 21 CFR Part 11-ready software for audit-ready counting workflows.

Precision colony counting

Purpose-built hardware and software for microbiology QC

The Cosmo Micro-BioCount2210 pairs a 12.4 megapixel German-made digital camera with uniform dome LED illumination to capture a clean, glare-free image of every petri dish, then runs advanced recognition software that identifies, counts and measures bacterial and fungal colonies in around two seconds per plate.

Colour, size, shape and contrast-based detection — down to 0.1 mm — is combined with a dedicated separation algorithm for colonies that are touching or overlapping, so counts stay accurate on crowded plates that often create manual counting errors.

Because the software ships 21 CFR Part 11-ready, with full audit trails, role-based access and qualification documentation, the Micro-BioCount2210 fits directly into validated pharmaceutical, food-safety and environmental microbiology workflows.

Cosmo Micro-BioCount2210 software identifying and counting colonies on a petri dish
A. Hardware

Imaging hardware built for glare-free, repeatable capture

Every count starts with a clean image — the Micro-BioCount2210’s camera and lighting are matched specifically for petri dish imaging.

12.4MP digital colour camera

DeXel-CAM, made in Germany, connected over USB 3.0 for fast, high-resolution image capture of every plate.

Transmitted & reflected dome lighting

Uniform LED ring lighting with white or RGB options, compatible with black and white backgrounds.

Bright-field & dark-field illumination

Glare-free lighting modes selectable to suit the plate type and media being imaged.

B. Automated colony counting software

Advanced software to identify, count and measure colonies on petri dishes

Purpose-built recognition software — not a generic image-analysis add-on — tuned specifically for bacterial and fungal colony morphology.

Plate & detection specifications
Plate size compatibility⌀55 mm to ⌀90 mm standard petri dishes
Counting time~2 seconds per plate
Media typesPour plates, surface plates, chromogenic dishes, RODAC plates, filter membranes
Colony detection0.1 mm diameter, adjustable detection threshold
Recognition & output
Recognition methodColour, size, shape and contrast-based recognition
Counting modesAutomated and manual mode
Results exportCSV, Excel, PDF (21 CFR mode: PDF export only)
01

Bacterial and fungal colony identification

Purpose-built recognition for both bacterial and fungal colony morphology, not a generic blob-counting algorithm.

02

Connected-colony separation algorithm

A dedicated algorithm separates and accurately counts colonies that are touching or overlapping.

03

Automated or manual counting mode

Run fully automated counts for routine throughput, or switch to manual mode for edge cases and analyst verification.

Why automate

Manual counting vs. Micro-BioCount2210

Manual counting is slower and more subjective — automation improves consistency and documentation.

 Manual countingMicro-BioCount2210
CountingAnalyst-dependentAutomated
SpeedMinutes per plate~2 sec per plate
Touching coloniesSubjective judgment callDedicated separation algorithm
RepeatabilityOperator-dependentStandardized workflow
RecordsManual logbookDigital, non-editable
Audit trailManual documentationBuilt-in, date/time-stamped
ReportingManualAutomated — CSV, Excel, PDF
C. 21 CFR Part 11 compliance features

Built for regulated microbiology workflows

21 CFR Part 11-ready software — designed for pharmaceutical QC, validation and audit workflows. Every compliance control a regulated microbiology lab needs for FDA and internal audits is built in from day one, not layered on after.

User Authentication→ Audit Trail→ Roles & Permissions→ Backup→ Non-editable Reports→ IQ/OQ/PQ

User Policy

Unique ID and password-controlled access.

Password Policy

Set length, complexity and auto logoff.

Audit Trails

Date and time-stamped, fully printable.

Roles & Privileges

Admin, Manager, Supervisor, Analyst, Engineer.

Data Backup / Restore

Automated backup with easy restore.

Non-Editable Reports

User-readable, tamper-proof reporting.

Qualification Documents

IQ, OQ and PQ included as standard.

D. Calibration & accuracy

System calibration and validation you can trace

Calibration

Calibration of the system with NPL (National Physical Laboratory) traceability.

Result validation

Standard particle slide used for ongoing result validation.

Routine qualification

Designed to support repeatable accuracy checks in validated lab workflows.

What's included

Everything you need to put the system into your lab

A Micro-BioCount2210 purchase isn't just hardware — implementation and support come with it.

Hardware

  • 12.4 MP DeXel-CAM camera
  • Dome LED illumination
  • Petri dish imaging stage

Software

  • Automated colony detection
  • Manual verification mode
  • Measurement & reporting

Compliance

  • Audit trail
  • User management
  • Backup / restore
  • IQ/OQ/PQ documentation

Implementation

  • Installation
  • Operator training
  • Qualification support
  • Ongoing service support
Applications

Where labs put the Micro-BioCount2210 to work

Ph

Pharmaceutical microbiology QC

Bioburden, environmental monitoring and sterility support testing.

Fb

Food & beverage safety testing

Routine microbial load counting across production and QC labs.

Wt

Water & environmental testing

Membrane filtration counts for water quality and environmental compliance.

Hc

Hospital & clinical microbiology

Faster plate reads to support diagnostic and infection-control workflows.

Cp

Cosmetics & personal care QC

Microbial limit testing for formulations and finished products.

Cr

CROs & testing laboratories

Validated, audit-ready counting for multi-client contract testing.

Trusted by laboratories

Backed by the same team behind 150+ installations across India & UAE

150+Installations worldwide
33+Pharma, industrial & research brands
India + UAELocal implementation & support

The Micro-BioCount2210 is built and supported by the same MicroCosmos engineering team behind the Cosmo PSA particle size analyzers and Cosmo PMT particulate matter testing systems, installed across pharmaceutical, industrial and research labs in India and the UAE.

Mangesh Ulhare, Technical Head at MicroCosmos
Technical review

Mangesh Ulhare

Technical Head, MicroCosmos Imaging Systems Pvt Ltd

This page has been technically reviewed for imaging, colony-counting workflow accuracy, and 21 CFR Part 11-ready software claims relevant to regulated microbiology laboratories.

Frequently asked questions

Common questions about the Micro-BioCount2210

What is the Cosmo Micro-BioCount2210 automated colony counter?

It is an automated colony counter that uses a 12.4 megapixel digital camera and dome LED illumination to identify, count and measure bacterial and fungal colonies on standard petri dishes, running in either automated or manual counting mode.

How fast does the colony counter count a plate?

Roughly 2 seconds per plate, using colour, size, shape and contrast-based recognition, with a dedicated algorithm that separates and accurately counts colonies that are touching or connected.

What plate sizes and media types does it support?

Standard petri dishes from 55 mm to 90 mm in diameter, across pour plates, surface plates, chromogenic dishes, RODAC plates and filter membranes, with colony detection down to 0.1 mm and an adjustable detection threshold.

Is the Micro-BioCount2210 compliant with 21 CFR Part 11?

Yes. The software includes unique-ID and password-based user access, configurable password policy and auto logoff, date/time-stamped audit trails, predefined user roles, data backup and restore, non-editable reports, and comes with IQ, OQ and PQ qualification documents.

How is the system calibrated and validated?

Using a standard particle slide with NPL-traceable calibration, so labs can validate counting accuracy as part of routine system qualification.

Which industries use automated colony counters like this?

Pharmaceutical microbiology QC, food and beverage safety testing, water and environmental testing, hospital and clinical microbiology, cosmetics and personal care testing, and CROs and contract testing laboratories.

Can you demonstrate the system using our own samples?

Yes. Our team can arrange a demonstration using your own plates and sample types so you can evaluate detection accuracy and workflow fit before deciding.

Can the system be installed and qualified at our facility?

Yes. Installation, IQ/OQ/PQ qualification, and calibration are carried out on-site at your lab as part of the standard implementation process.

Do you provide IQ/OQ/PQ documentation?

Yes. Installation Qualification, Operational Qualification and Performance Qualification documentation are included as standard, not sold separately.

Is training included?

Yes. Operator training is included as part of implementation, covering routine operation, manual verification mode, and report generation.

Can the system integrate with our existing laboratory workflow?

The Micro-BioCount2210 exports results as CSV, Excel, or PDF, and our team can advise on fitting it into your existing LIMS or documentation workflow during the consultation stage.

What support is available after installation?

Ongoing service, spares, and remote support are available from MicroCosmos's India and UAE teams for the life of the instrument.

Can the system be configured for our specific plate/media types?

The Micro-BioCount2210 supports pour plates, surface plates, chromogenic dishes, RODAC plates and filter membranes as standard; talk to our team about any less common formats your lab uses.

Faster counts. Fewer errors. Audit-ready records.

Book a live demonstration of the Micro-BioCount2210.

Talk to MicroCosmos Imaging Systems about plate types, throughput, and 21 CFR Part 11 validation requirements for your lab.

WhatsApp Us Call +91 94 04 888 222 Download Brochure (PDF)
Office402, Brand Square, Kunjir Chowk, Pimple Saudagar, Pune – 411027
Phone+91 94 04 888 222
ManufacturerMicroCosmos Imaging Systems Pvt Ltd

Also see Cosmo PSA particle size analyzers, Cosmo PMT particulate matter testing, or the Cosmo Dry Powder Disperser. New to automated colony counting? See what an automated colony counter is.

Request a quote

Get pricing for the Micro-BioCount2210

    Microcosmos — Footer